Reasons why Pokémon GPS does not Work On Apple iPhone SE (2020)?

There are several reasons for which Pokémon GPS does not work. Whether you are an android or iPhone user the issue remains and this means that you need to take precautionary steps. Some reasons for the issue are as follows:

1. The GPS radio of your android or iOS device is not working or has malfunctioned. These radios have been improved over time but there is still a long way to go.
2. The location of the player also matters a lot. If you are indoors then there is a possibility that you are getting into issues and not receiving GPS signals in full and this is all because of the poor connectivity and signal strength.

Part 1: 3 Ways to fix Pokémon GPS not working on iOS devices

For iOS devices, many issues can be faced by users. This is because the GPS signals might not work perfectly with the iOS device as well. There are several ways to fix the issue and this section will deal with all of these ways to make the process easy for you.

Fixture 1: Turning on Wi-Fi

There is a possibility that the Wi-Fi is not working and this is the main reason that Pokémon Go gets you in trouble. To get the issue resolved it is advised to swipe down the command center and tap on the Wi-Fi signal icon to make sure that it is highlighted. Swipe up to check the game again.

Fixture 2: Reload the game

This is another important aspect that should be taken care of if the Pokémon Go GPS not working. Reloading the game makes sure that it is refreshed and this also leads to issue fixture when it comes to GPS signals. Do this by simply pressing the home button and returning to the home screen. Open a new application or do something else for the moment. Enter the multitasking screen by double-pressing the home screen button. Swipe to the Pokémon Go card and reenter the game.

Fixture 3: Restart the Phone

Press and hold the volume button and the side button. The power off slider appears, just wait for 30 seconds for the Apple iPhone SE (2020) device to restart. In most cases restarting the Apple iPhone SE (2020) device will get the issue of GPS not working Pokémon go iPhone resolved.

Part 2: The best GPS Spoofer to be used

Dr. Fone Virtual location is the best and the most used GPS spoofer that will make your life easy when it comes to Pokémon Go. The program is the best and it also makes sure that the GPS related issues are resolved with care and perfection. With the best technology and professional development, this program has been at the forefront of GPS spoofing. If the GPS signal not working then it is advised to make sure that Dr. Fone is used to get the work done with ease. There are several features of the program that will make sure that you get a step ahead of your Pokémon Go competitors.

How to use Dr. Fone Virtual Location

The process that you need to follow is mentioned as follows.

Step 1: Install the Program

Download the exe file and install the program, to begin with, the process.

Step 2: Virtual Location Enablement

Connect the iPhone with the system and click on the button that states get started to enable the virtual location.

Step 3: Device Location

The center on button is there on the program. Press it and the program will detect the location on your device.

Step 4: Changing Location

For teleportation press the third button on the upper right corner. Also, type the name of the location where you want to teleport in the bar.

Step 5: Movement to the teleport

Press the move here button to move to the teleported location that has been selected.

Step 6: Validate the Location

The location will be locked on the iPhone and it will display the same location as on the program. This also completes the process in full.

Part 3: 3 Ways to fix Pokémon GPS not working on Android devices

The android devices might also get into an issue that is under discussion. To make sure that the problem is fixed it is advised to follow the 3 most important ways that are discussed in this section.

Method 1: Turn on Location Services

Swipe down to access the notification panel of the program. Make sure that the location button is click. This is to be done if the location is not highlighted already. The GPS satellite will be able to detect the pinpoint location of the player and this will resolve the problem.

Method 2: Restart the Apple iPhone SE (2020) device

This is another important way to get the GPS signal as it will refresh the phone. Just long-press the power button and select the option of restart from the screen that appears.

Method 3: Update the Application

This is another important aspect. There are auto-updates disabled by some users and this can lead to a problem if the application is not updated. To avoid this scenario it is advised not to update just the Pokémon Go app but every application to overcome the issue in full. Just visit Play store > my apps and games > update all.

Conclusion

The Dr. Fone Virtual location is the best and the most advanced program that can be used to make sure that location spoofing is made easy. The program is not only easy to use but it has been developed to get the players the best location services that they want. For all the location and AR-based games, it is advised to use this program as it will overcome all sorts of issues. With Dr. Fone’s virtual location it is easy to make sure that the location is spoofed for iOS that does not let it do otherwise. Dr. Fone will not only get you the lifetime of updates but will also ensure that you get the best results with respect to location.

What Pokémon Evolve with A Dawn Stone For Apple iPhone SE (2020)?

If you are a diehard Pokémon Go player, you probably know how exciting it is when your Pokémon evolves. Evolutions mean a boost in stats and strength in raids. Plenty of Pokémon users are conversant with the traditional raiding as a way to evolve. However, you can use special items to evolve your Pokémon. One such item is the dawn stone. In this article, we are going to take you through a detailed guide on dawn stone evolutions and how to get it with ease.

Part 1. Dawn Stone Pokémon Evolutions

What is Dawn Stone in Pokémon Sword and Shield?

Like Shiny Stone, dusk stone, Sun Stone, and Moon Stone, Dawn Stone is another peculiar evolution item in Pokémon Sword and Shield. If you combine Dawn Stone with certain Pokémon, they will evolve to another level. This peculiar stone was introduced in Generation IV, and in terms of appearance, Dawn Stone sparkles like a glittering eye.

You can get dawn stone from the Digging Duo found near the Wild Area nursery. You will, however, be required to pay them 500 watts before digging random items for you. Remember, this is a trial and error thing, and you might have to spend a lot of watts before finding a dawn stone. Also, you can get any evolutionary stone, including the Dawn Stone in the Lake of Outrage. Here, you will have to first obtain a Rotom Bike on route 9 to move across the water.

Pokémon that Evolve with Dawn Stone

As aforementioned, dawn stone is an evolution item that is used to evolve certain species of Pokémon. To evolve your Pokémon using Dawn Stone in Pokémon Sword and Shield, enter the bag menu and choose the “Other Items” tab. Hover on the Dawn Stone and select the “Use this item” option. Finally, select the Pokémon to evolve. These Pokémon that can be evolved using dawn stone include:

1. Kirlia

Kirlia is a small humanoid Pokémon whose upper body and arms are white while the waist and legs are light green. This makes it appear as though it is wearing tights. Kirlia’s natural abilities include synchronization and trace. It loves dancing on sunny mornings and becomes more beautiful when they sense e positive emotions of trainers. A vast majority of Kirlia live in the cities, although some are still found in the forest. Kirlia evolved from Ralts and has two possible evolutions, namely Gardevoir and Gallade. If it reaches level 30, it evolves to Gardevoir. However, if it is male and given a dawn stone, it will evolve to Gallade.

2. Snorunt

Snorunt is an ice-type Pokémon that was introduced in Generation III. It is also referred to as the “Snow Hat Pokémon.” You can find Snorunt in seafoam café, snow canyon, or even in Mysterious Grotto. Furthermore, you can obtain it by trading or Pokémon Roulette. Snorunt can evolve into Glalie or Froslass. If it reaches level 42, Snorunt evolves to Glalie. For Snorunt to evolve into Froslass, it requires a dawn stone. However, the Snorunt must be a female to evolve to Froslass.

Part 2. Hacks and Tricks to get Dawn Stone Pokémon

It is every player’s wish to avoid the long hunt for a Dawn Stone into their Podex. This issue has given birth to some of the hacks and tricks to help players cross territory and find the intended evolution item or Pokémon. Some of these tricks include:

1. Use iOS spoofing tool- Dr. Fone Virtual Location

Dr. Fone Virtual Location is an amazing iOS spoofer tool that allows users to fake their actual location. This makes it a good tool for location-based games like Pokémon Go. With Dr. Fone Virtual Location, you can teleport to whichever place across the globe by a click of a button. If you want to simulate movements to confuse the game app, you can simulate two or multiple points. Furthermore, you can leverage the joystick to improve the flexibility of GPS control. To teleport to any place in the world with Dr. Fone Virtual Location’s help, follow the steps below.

Step 1. Download Dr. Fone Virtual Location and install it on your computer. Once installed, launch it and then select the “Virtual Location” tab on the primary window. Also, connect your iOS device to the computer.

Step 2. On the next page, click the “Get Started” button to proceed.

Step 3. You should see three icons on the top-right of the subsequent page. Click the third icon to switch to the teleport mode. At the top-left, enter the location of the place you want to teleport to and click “Go.”

Step 4. When the program has found the location, a dialog box will appear in the background. Click “Move Here” to teleport to this location.

2. Use Pokémon Gotcha

Pokémon Go-tcha makes hunting Pokémon and evolution items much easier. With this tool, you can go for a hunt without looking at your smartphone. When you run Go-tcha Evolve on the Pokémon Go application, you can set color animations and vibrations to alert you about Pokémon and pokestops that are in range. Moreover, you can use the auto-catch feature so that you don’t have to respond to alerts. You can also check on time, your stats, and leverage the new pedometer feature to count your steps. This program comes with various exciting colors for you to choose from and a bunch of other great features.

3. Use iTools

iTools location spoofer is another good GPS mocking tool that is suitable for Pokémon Go games. By faking the GPS location, you can easily access territories where rare Pokémon or evolution items are available while seated at home or in the office. This program supports iOS 12 devices or earlier versions. However, there are scores of people who have complained about several crashes. Nevertheless, you can try it if you have got some penny to spare.

Here are Different Ways to Find Pokemon Go Trainer Codes to Add to Your Account On Apple iPhone SE (2020)

“From where can I look for new Pokemon Go trainer codes so that I can battle with other people easily?”

While Niantic has introduced new features (like Pokemon Go battles leagues) to fight with other trainers, there are still limited ways to find other players. Due to this, a lot of players look for sources to find Pokemon Go trainer codes of other people. Thankfully, there are tons of servers and websites to look for trainer codes for Pokemon Go. In this post, I will introduce 10 different places from where you can get trainer codes in Pokemon Go.

Part 1: How to Find your Pokemon Go Trainer Code (Or Add Others)?

Before finding various PoGo trainer codes, you should know where you find your own code. Following the same drill, you can even add other trainer codes for Pokemon Go to your account.

1. To begin with, just launch the Pokemon Go app on your device and tap on your avatar at the bottom to explore more options.

2. This will display details regarding your account with your avatar. From the top section, you can tap on the “Friends” field.

3. Here, you can view all the trainers in the game you have already added to your account. Now, tap on the “Add Friends” option here to invite a user with their trainer code in Pokemon Go.

4. That’s it! To add anyone else, you can just enter their PoGo trainer code, and send a request. Besides that, you can view your Pokemon Go trainer code and can even share it with others from here.

Part 2: 5 Best Websites to Find Pokemon Go Trainer Codes

If you are looking for reliable websites to find Pokemon trainer codes, then you can explore these options.

1. Reddit

Reddit has a thriving community of Pokemon Go players that you would love to explore. Apart from the official Pokemon Go sub-reddit, you can explore tons of fan-made groups as well. Here, you can find dedicated threads to exchange trainer codes for Pokemon Go with numerous other sources.

2. Facebook

Just like Reddit, you can also find tons of dedicated pages and groups made by Pokemon Go players on Facebook. Most of these groups are closed so you have to first join them to exchange trainer codes in Pokemon Go.

3. Quora

There are different ways to find Pokemon Go trainer codes in Quora. You can either look for questions posted by other people for the same or join Pokemon Go spaces where you can find tons of other players.

4. PoGo Trainer Club

This is a dedicated website to exchange code by trainers in Pokemon Go. You can simply list your code for other players to find or browse other people’s codes. If you want, you can also share trainer QR codes for Pokemon Go here.

5. Poke Friends

This is a dedicated app and is considered one of the best places to find Pokemon Go trainer codes. You can look for other players from all over the world in this directory and share your trainer QR codes for Pokemon Go with them.

Part 3: 5 Best Discord Servers to Find Trainer Codes in Pokemon Go

Discord is a hub for social gamers and Pokemon Go is no such exception. If you are looking for PoGo trainer codes, then consider joining these Discord servers.

1. Pokedex100

This is one of the most popular Discord servers dedicated to Pokemon Go players. Not only will it help you find Pokemon Go trainer codes, but you can also get tips from other pro players.

2. Pokemon Go Gamers Community

There are thousands of members in this Discord server, making it a friendly community. You can easily find several Pokemon trainer codes to add to your account here.

3. Pokemon Go International Raider

If you want to make friends from all over the world, then this would be the best Pokemon Go Discord server. You can find players from different countries so that you can exchange gaming ideas and play with them whenever you want.

4. PoGo Trainers

This might be a newly created Pokemon Go Discord server, but it is pretty active. The group is extremely social and encourages its members to exchange their Pokemon Go trainer codes with each other.

5. Pokesnipers

Pokesnipers is another popular Pokemon Go Discord server you can consider joining. Apart from finding PoGo trainer codes, you can also get details about the spawning location of Pokemons or popular raids.

Part 4: How to Win Pokemon Go Trainer Battles by Catching Powerful Pokemons

Now when you have added trainer codes in Pokemon Go, you can easily fight with other players. Though, if you want to win more battles, then you need to have the most powerful and meta Pokemons. To catch the Pokemons of your choice remotely, you can use a location spoofing tool like Dr.Fone – Virtual Location (iOS) .

• A part of the Dr.Fone toolkit, it will let you spoof the location of your Apple iPhone SE (2020) to anywhere you like.
• Players can enter the exact coordinates of the Pokemon’s spawning location or provide its address.
• The interface of the application has a map, letting you browse the area and drop the pin anywhere you like.
• Besides that, the tool can further help you simulate the movement of your device between multiple spots.
• You can use a GPS joystick to move realistically and at a preferred speed. There is no need to jailbreak your device to use Dr.Fone – Virtual Location (iOS).

I hope that after reading this post, you would be able to find Pokemon Go trainer codes from different sources. I have also listed a quick guide to add Pokemon Go trainer codes and how to find your code. Also, if you wish to win more matches in Battle Leagues, then try a reliable tool like Dr.Fone – Virtual Location (iOS). Using it, you can easily catch tons of Pokemons without leaving your house.

Also read: