Reasons why Pokémon GPS does not Work On Apple iPhone 14 Pro Max? | Dr.fone

Reasons why Pokémon GPS does not Work On Apple iPhone 14 Pro Max? | Dr.fone

Iris Lv11

Reasons why Pokémon GPS does not Work On Apple iPhone 14 Pro Max?

There are several reasons for which Pokémon GPS does not work. Whether you are an android or iPhone user the issue remains and this means that you need to take precautionary steps. Some reasons for the issue are as follows:

  1. The GPS radio of your android or iOS device is not working or has malfunctioned. These radios have been improved over time but there is still a long way to go.
  2. The location of the player also matters a lot. If you are indoors then there is a possibility that you are getting into issues and not receiving GPS signals in full and this is all because of the poor connectivity and signal strength.

GPS Signal Not Found Pokemon

Part 1: 3 Ways to fix Pokémon GPS not working on iOS devices

For iOS devices, many issues can be faced by users. This is because the GPS signals might not work perfectly with the iOS device as well. There are several ways to fix the issue and this section will deal with all of these ways to make the process easy for you.

Fixture 1: Turning on Wi-Fi

There is a possibility that the Wi-Fi is not working and this is the main reason that Pokémon Go gets you in trouble. To get the issue resolved it is advised to swipe down the command center and tap on the Wi-Fi signal icon to make sure that it is highlighted. Swipe up to check the game again.

Turn On Wi Fi iPhone

Fixture 2: Reload the game

This is another important aspect that should be taken care of if the Pokémon Go GPS not working. Reloading the game makes sure that it is refreshed and this also leads to issue fixture when it comes to GPS signals. Do this by simply pressing the home button and returning to the home screen. Open a new application or do something else for the moment. Enter the multitasking screen by double-pressing the home screen button. Swipe to the Pokémon Go card and reenter the game.

Reload game iPhone

Fixture 3: Restart the Phone

Press and hold the volume button and the side button. The power off slider appears, just wait for 30 seconds for the Apple iPhone 14 Pro Max device to restart. In most cases restarting the Apple iPhone 14 Pro Max device will get the issue of GPS not working Pokémon go iPhone resolved.

Part 2: The best GPS Spoofer to be used

Dr. Fone Virtual location is the best and the most used GPS spoofer that will make your life easy when it comes to Pokémon Go. The program is the best and it also makes sure that the GPS related issues are resolved with care and perfection. With the best technology and professional development, this program has been at the forefront of GPS spoofing. If the GPS signal not working then it is advised to make sure that Dr. Fone is used to get the work done with ease. There are several features of the program that will make sure that you get a step ahead of your Pokémon Go competitors.

How to use Dr. Fone Virtual Location

The process that you need to follow is mentioned as follows.

Step 1: Install the Program

Download the exe file and install the program, to begin with, the process.

drfone home

Step 2: Virtual Location Enablement

Connect the iPhone with the system and click on the button that states get started to enable the virtual location.

virtual location 1

Step 3: Device Location

The center on button is there on the program. Press it and the program will detect the location on your device.

virtual location 3

Step 4: Changing Location

For teleportation press the third button on the upper right corner. Also, type the name of the location where you want to teleport in the bar.

virtual location 04

Step 5: Movement to the teleport

Press the move here button to move to the teleported location that has been selected.

virtual location 5

Step 6: Validate the Location

The location will be locked on the iPhone and it will display the same location as on the program. This also completes the process in full.

virtual location 6

Part 3: 3 Ways to fix Pokémon GPS not working on Android devices

The android devices might also get into an issue that is under discussion. To make sure that the problem is fixed it is advised to follow the 3 most important ways that are discussed in this section.

Method 1: Turn on Location Services

Swipe down to access the notification panel of the program. Make sure that the location button is click. This is to be done if the location is not highlighted already. The GPS satellite will be able to detect the pinpoint location of the player and this will resolve the problem.

Turn on location service andriod

Method 2: Restart the Apple iPhone 14 Pro Max device

This is another important way to get the GPS signal as it will refresh the phone. Just long-press the power button and select the option of restart from the screen that appears.

Restart android phone

Method 3: Update the Application

This is another important aspect. There are auto-updates disabled by some users and this can lead to a problem if the application is not updated. To avoid this scenario it is advised not to update just the Pokémon Go app but every application to overcome the issue in full. Just visit Play store > my apps and games > update all.

Update pokemon go android

Conclusion

The Dr. Fone Virtual location is the best and the most advanced program that can be used to make sure that location spoofing is made easy. The program is not only easy to use but it has been developed to get the players the best location services that they want. For all the location and AR-based games, it is advised to use this program as it will overcome all sorts of issues. With Dr. Fone’s virtual location it is easy to make sure that the location is spoofed for iOS that does not let it do otherwise. Dr. Fone will not only get you the lifetime of updates but will also ensure that you get the best results with respect to location.

The Ultimate Guide to Get the Rare Candy on Pokemon Go Fire Red On Apple iPhone 14 Pro Max

In all Pokemon Go versions, a Rare Candy will automatically uplift you to the next level. These cadies are powerful and come with a lot of extra rewards. That said they are also very difficult to find, especially in Pokemon Fire Red. This article will show you some of the ways in which you can find Rare Cady, and level up quickly to improve your status in the game.

Part 1: What is the rare candy in Pokémon Go Fire Red?

All Pokemon Go game variations have Rare Candy, and they are mainly used to upgrade the level of any Pokemon by 1. If you were at level 9, you automatically go up to level 10, etc. This will save you from having to engage in battles to raise your level. You may also earn the level attacks that you would have earned at that level, even without having to fight.

There are a limited number of Rare Candy in Pokemon Go Fire Red. However, you can get unlimited Rare Candies by using Pokemon Go Fire Red Rare Candy cheat codes through GameShark or Action Replay. You may also get them through cloning your existing Rare Cady.

When you use a Rare Candy, you get enough Exp. Points to move to the next level. This means that it is best to use them for getting to the next level, especially when it becomes too challenging. Although you get to the next level, you will not earn any Effort Value Points, which will make your Pokemon weaker than it would have been if you had leveled up through training.

Pokemon Rare Candy Trainer Card

Part 2: How to get rare candy in Pokemon Go Fire Red?

There are three main ways in which you can get Rare Candy in Pokemon Go Fire Red. The first one is using a location spoofer to catch rare candy without moving. The second one involves going to areas where you can find the Rare Cady and the last one involves using a Fire Red Rare Candy Code.

Getting Pokémon GO Fire Red Rare Candy without Walking/Moving

Searching for the simplest way to collect rare candies in Pokémon GO? If your answer is affirmative, there is good news: We have the perfect tool for you. Wondershare Dr.Fone - Virtual Location allows you to play Pokémon GO from the comfort of your house. You no longer need to walk miles to visit gyms and PokéStops or hatch eggs.

All of this can be done without even moving from your bed. Dr.Fone – Virtual Location facilitates you in mimicking realistic movements of the map to play Pokémon GO. To make this process easier for you, there is also a joystick included in the tool to help you simulate movement. Furthermore, it comes with pre-built functions such as a one-stop route and muti-stop route to further help you.

Notable Characteristics of Dr.Fone - Virtual Location

  1. Not only can you follow the routes on the map, but you can also import and export route files.
  2. There is no need to jailbreak your iOS device to spoof location when using Dr.Fone - Virtual Location.
  3. When spoofing your location on iOS devices, Dr.Fone supports up to 5 devices from a single Mac or PC.

Instructions for Getting Pokémon GO Fire Red Rare Candy Without Walking/Moving

Dr.Fone - Virtual Location offers a simple and easy-to-understand way to spoof your location when playing Pokémon GO. The following are the steps you need to follow for location spoofing:

Step 1: Connect to Dr.Fone - Virtual Location and Set Target Location

With Dr.Fone - Virtual Location launched on your computer, connect your smartphone. Once on the map screen, click the “Teleport Mode” icon, the first one, from the toolbar near the top-right corner. Now tap the search bar on the top left corner, enter the targeted location, and press “Enter.”

search for the required location

Step 2: Teleport to Targeted Location

The cursor on the map screen will move to the location you have entered on the map. If you want to move there when spoofing your location, click “Move Here.” It will change the location on the map screen and on your device to the location you entered. You can confirm it by accessing your smartphone and opening a map application.

move to location virtually

Step 3: Simulate Movement and Configure Route

To simulate movement when spoofing your location, you can select either “One-Stop Route” or “Multi-Stop Route.” Both are the third and fourth options, respectively, on the toolbar near the top right corner. Now, choose the stop points, type of trip, walking speed, and other parameters. Once you are done, tap “Move Here” or “Start Moving” to initiate the movement.

set route parameters to start moving

Getting Pokemon Go Fire Red Rare Candy Normally

You would have to visit certain locations in order to get Pokemon Go Rare Candy in the normal way. The locations which have been found to give most Rare Candy are:

  • Take a look behind the house in Cerulean City
  • Go to Mount Moon and get one
  • Check at the Rocket Game corner
  • Take a journey to the Ghost Tower
  • When you get to the Safari Zone Warden’s House, check behind the boulder.
  • You may also use Meowth or any other Pokemon that has Pickup abilities and try your luck.

Getting Pokémon Go Fire Red Rare Candy with cheat codes

The best way to go about this is to use a Pokemon Go Fire Red emulator on your computer and then use the fire red chat code shown below and follow the simple instructions.

Look for the Pokemon Go Fire Red codes posted on various user sites.

Use GameShark or My Boy game emulator to install the codes and then get the Rare Candy that you need.

The cheat code for Pokemon Go Fire Red Candy is:

Part 3: How do you get unlimited rare candies in Pokemon Red?

Sometimes, you don’t want to keep adding Pokémon Go Fire Red Rare candy codes one at a time. You simply want to Master Code that will help you get the Rare Candy whenever you need them.

This is how you go about getting unlimited Rare Candy on Pokemon Go Fire Red.

82025840 0044

It can be used to get a single Rare Candy or to unlimited Rare Candy as shown below:

Pokemon Go Fire Red Rare Candy Storage

Pokemon Go Cheat Code for Unlimited Rare Candies

82025840 0044

How to use the code:

Step 1 – Turn off or delete any other code that you may have stored.

Step 2 – go to a Pokéstop and then save your game.

Step 3 – create a new cheat as follows;

  • Code Name: Rare Candy
  • Code Type: CodeBreaker
  • Code: 820258400044

Wait for it to be activated and then save it.

Enter details of the cheat code

Step 4 – Enter the Pokéstop and deactivate the cheat code.

Step 5 – Go to your computer and type in “PC > Item Storage”.

Step 6 – Withdraw a SINGLE Rare Candy

Step 7 – check if you have double Rare Candy entries in your storage. If they are not duplicated, then the cheat has worked as it should. If they are duplicated, then you have to close the game and redo all the steps above.

Step 8 – Now exit and then go back to your Item Storage, where you can withdraw as many Pokemon Go Fire Red Rare Candies as you would want. Simply pick a number between 001 and 999, but never use the down arrow.

In conclusion

Getting Rare Candy in Pokemon Go Fire Red is a difficult task. These cadies are not easy to find and they may not be in a location that you can access easily. The article shows you the locations at which you can collect Pokemon Go Fire Red Candy using the normal gameplay. You may also use Pokemon Go GameShark cheat codes and get unlimited Rare Candy to use whenever you need them.

Planning to Use a Pokemon Go Joystick on Apple iPhone 14 Pro Max?

Pokemon Go is probably one of the most popular location-based augmented reality games that encourage us to step out. Sadly, players can’t explore their surroundings or travel to play the game all the time. That’s why they often take the assistance of a Pokemon Go joystick. While Pokemon joysticks are extremely popular, they have some downfalls as well if you don’t pick the right tool. Therefore, in this post, I will list the risks and benefits of using a Pokemon Go joystick hack to help you make up your mind.

Pokemon Go Joystick Banner

Part 1: Pokemon Go Joystick 101: Things to Know

Before we get into the details, it is important to know the basics of this fake GPS Pokemon Go hack. Ideally, Pokemon Go joysticks are dedicated mobile or desktop applications that let us simulate the movement of our device. In most of the spoofing tools for Pokemon Go, the following features are offered.

  • Users can directly spoof their location on Pokemon Go to anywhere they like in the world.
  • They can also simulate the movement of their device (and the trainer) using the inbuilt joystick.
  • The Pokemon Go Joystick APK can also let you set up a preferred speed for walking, jogging, or running.

Pokemon Go Joystick

Therefore, with the help of a Pokemon Go hack APK like this, players don’t have to leave their house to catch Pokemons. They can also participate in raids to hatch eggs from the comfort of their home.

Part 2: What are the Benefits of Playing Pokemon Go with a Joystick?

There are several reasons why Pokemon Go joystick iOS/Android hacks are so popular. After all, they give us the convenience to play our favorite game without breaking a sweat. Here are some of the major reasons why Pokemon Go joystick hacks are becoming so popular:

  • Stay Safe Indoors

    Since we are in the middle of a global pandemic, it is not recommended to go out to explore Pokemons. Besides that, your neighborhood might not be safe or there could be unfavorable weather conditions outside. Therefore, you can consider using a Pokemon Go joystick to catch Pokemons without compromising your safety.

  • Move Beyond your Area

    If you are in a rural area, then chances are that there could be limited spawning locations for Pokemons. With a fake GPS Pokemon Go app, you can spoof your location to any major city.

  • Catch More Pokemons

    One of the major benefits of using a Pokemon Go spoofer APK is that we can easily catch tons of Pokemons without exploring any area. Just enter the exact spawning location of the Pokemon and catch it!

  • Level-up in the Game Easily

    From participating in raids to hatching eggs faster, there are so many other things that you can do with a Pokemon Go joystick.

  • Have a Better Gaming Experience

    Overall, a Pokemon Go spoofing iOS/Android solution will provide tons of add-on features that would improve your gaming experience.

Part 3: What are the Risks of Using Pokemon Go Joysticks?

While there are numerous benefits of using a Pokemon Go joystick, its constant use can also backfire in the long run.

  • Account Ban by Niantic

    Ideally, you should know that the use of any third-party service (like a fake GPS Pokemon Go hack) is against the terms and conditions of the game. At first, if Niantic will detect its use, then it will simply display a warning message. Though, after several warning messages, if your account is still flagged, then it can get permanently banned.

    Pokemon Go Account Ban

    To avoid the banning of your Pokemon Go account, you can consider a “cooldown duration”. This simply suggests waiting for a specific duration before changing your location in the game.

    Pokemon Go Cooldown Duration

  • Software Hack on Jailbroken Devices

    To use a Pokemon Go joystick iOS hack, you might have to jailbreak your device. This can even null the warranty of your device and would make it susceptible to security threats. You might already know that a jailbroken device can easily be corrupted by the spoofer or any other app.

  • The Pokemon Go Spoofing Company Might Shut Down

    Chances are that the Pokemon Go spoofing solution that you have purchased might go out of business. For instance, iSpoofer (an iOS fake GPS tool) is no longer functioning and its existing users can’t even reach out to its customer support after getting their account banned. That’s why it is highly recommended to only pick a reliable Pokemon Go joystick solution.

As you can see, picking a reliable Pokemon Go joystick is the most important thing to play the game remotely. Therefore, I would recommend using Dr. Fone - Virtual Location (iOS) as the application is extremely easy to use and will meet all your Pokemon Go location spoofing needs. The best part is that you don’t even need to jailbreak your Apple iPhone 14 Pro Max to spoof its location using Dr.Fone – Virtual Location.

  • Users can instantly spoof their location on Pokemon Go to anywhere they like by entering the exact coordinates or its address.
  • It also has dedicated one-stop and multi-stop modes that would let you set up a route to simulate the movement of your Apple iPhone 14 Pro Max.
  • If you want, you can even enter the preferred speed for the simulated movement or the number of times to cover it.
  • The application will display a dedicated GPS joystick, letting you move realistically on the map.
  • There is also an option to mark certain routes as favorites or import/export routes as GPX files.

virtual location

Conclusion

I hope that after following this guide, you would be able to know more about the fake GPS Pokemon Go hacks. As you can see, I have included all kinds of benefits and limitations of using a Pokemon Go joystick in this guide. If you don’t want to get your account banned for using a Pokemon joystick, then consider going with a reliable option like

Dr. Fone - Virtual Location (iOS) . Without the need for jailbreaking, it will let you enjoy a dedicated GPS joystick and simulate your device movement remotely.


Also read:

  • Title: Reasons why Pokémon GPS does not Work On Apple iPhone 14 Pro Max? | Dr.fone
  • Author: Iris
  • Created at : 2024-06-15 11:03:16
  • Updated at : 2024-06-16 11:03:16
  • Link: https://ios-pokemon-go.techidaily.com/reasons-why-pokemon-gps-does-not-work-on-apple-iphone-14-pro-max-drfone-by-drfone-virtual-ios/
  • License: This work is licensed under CC BY-NC-SA 4.0.